3500/92 136180-01 system communication interface module

The BENTLY 3500/92 136180-01 is a system communication interface module (also known as a "Gateway Module") in Bently Nevada’s 3500 Series Rotating Machinery Protection & Monitoring System. As the core communication hub between the 3500 local monitoring rack and upper-level control/monitoring systems (e.g., DCS, SCADA, or asset management software), it enables real-time data transmission, remote configuration, and centralized monitoring of the entire 3500 system. The part number 136180-01 denotes a standardized configuration with multi-protocol support, optimized for industrial scenarios requiring seamless integration of machinery protection data into plant-wide control networks. Below is its comprehensive detailed information:

I. Core Technical Parameters

Category	Specific Specifications
Basic Identification	- Model: 3500/92 (System Communication Interface Module)- Part Number: 136180-01- Applicable System: Bently 3500 Series (compatible with 3500/10 single-frame and 3500/20 multi-frame racks)- Primary Role: Data gateway between 3500 rack backplane and upper-level systems
Communication Protocols	- Ethernet Protocols: Ethernet/IP (for Rockwell Allen-Bradley DCS), Modbus TCP/IP (universal industrial protocol), Profinet (for Siemens DCS)- Serial Protocols: Modbus RTU (via RS-485 port, for legacy systems), RS-232 (for local configuration/debugging)- Bently Proprietary Protocol: NetCon (for communication with Bently EnerVista Machinery Health software)- Data Transfer Rate: 10/100 Mbps (Ethernet, auto-negotiation); up to 115.2 kbps (serial ports)
Data Transmission Capabilities	- Monitored Data: Real-time values (vibration, speed, temperature, position), alarm status (Warning/Danger), module health (fault codes), and event logs- Data Update Rate: Configurable (100 ms ~ 10 s); typical 1 s for critical parameters (e.g., turbine speed)- Maximum Nodes: Supports up to 8 3500 racks (multi-frame configuration) via rack-to-rack communication- Data Storage: Local buffer for 1,000 recent events (time-stamped) to prevent data loss during temporary network outages
Hardware Interface	- Ethernet Ports: 2 x RJ45 ports (for network redundancy, supporting ring topology)- Serial Ports: 1 x RS-485 (terminal block), 1 x RS-232 (DB9 connector)- Backplane Connection: 3500 rack standard backplane interface (for power and data exchange with other modules)- Status LEDs: 6 front-panel LEDs (Power, Ethernet Link, Ethernet Activity, Serial Activity, Alarm, Fault)
Power & Environment	- Power Supply: +24 V DC (from 3500 rack backplane), typical current 0.3 A, maximum power consumption 3.6 W- Operating Temperature: -40°C ~ +70°C (suitable for turbine rooms, refineries, and metallurgical plants)- Storage Temperature: -55°C ~ +85°C- Relative Humidity: 5% ~ 95% (non-condensing)- EMC Immunity: Complies with IEC 61000-4-2 (ESD: ±8kV contact, ±15kV air) and IEC 61000-4-6 (EFT: ±2kV line-line, ±4kV line-ground)